Energi Data Dk vs Energy Charts
A side-by-side look at the Energi Data Dk and Energy Charts MCP servers: transport, auth, tools, quality signals, and the config to install either one in Claude, Cursor, Windsurf or VS Code.
Verdict: choose Energi Data Dk for environment & nature work as a local process; choose Energy Charts for environment & nature as a local process. You can also run both side by side in one mcpServers block.
Which MCP server should you choose?
Choose Energi Data Dk when
- You need dedicated capabilities in the Environment & Nature domain.
- You prefer a local stdio subprocess transport.
- You want tools like
spot_prices, co2_intensity, query_dataset.
Choose Energy Charts when
- You need dedicated capabilities in the Environment & Nature domain.
- You prefer a local stdio subprocess transport.
- You want tools like
generation_mix, public_power, electricity_price.
Feature & specification comparison
Rows where the two servers differ are marked.
| Spec | ||
|---|---|---|
| Category | Environment & Nature | Environment & Nature |
| Quality signal | 53/100 · Good | 55/100 · Good |
| Install command | Confirmed | Confirmed |
| Transport | Local subprocess (stdio) | Local subprocess (stdio) |
| Auth | Not declared | Not declared |
| Pricing | Not declared | Not declared |
| Required env vars | None listed | None listed |
| Verified owner | Community listing | Community listing |
| GitHub stars | 0 | 0 |
| Directory activity | 1 views 0 installs 0 upvotes | 1 views 0 installs 0 upvotes |
| Tools | 3 | 6 |
| Full listing | View Energi Data Dk | View Energy Charts |
Tools & capabilities
Energi Data Dk tools 3
spot_pricesDay-ahead electricity spot prices from Energi Data Service (Energinet, Denmark/Nordic). Prices per bidding zone (PriceArea) in DKK and EUR per MWh, hourly. Bidding zones: DK1 (west Denmark), DK2 (east Denmark), DE (Germany), NO2, SE3, SE4, and others. Omit "area" to get all zones. Keyless official…co2_intensityReal-time grid CO2 emission intensity (g CO2/kWh) from Energinet Denmark, sampled every 5 minutes per bidding zone (DK1=west, DK2=east); defaults to the last 12 readings (~1 hour). Lower values mean cleaner electricity.sampled every 5 minutes per bidding zone. Areas: DK1 (west Denmark), DK2 (east D…query_datasetGeneric escape hatch for any of the ~100 Energi Data Service (Energinet, Denmark) datasets. Examples: "ProductionConsumptionSettlement" (production/consumption by type per area+hour), "CO2EmisProg" (CO2 prognosis), "Elspotprices", "CO2Emis". Returns the raw records array for the dataset. Keyless of…
Energy Charts tools 6
generation_mixThe CURRENT ELECTRICITY GENERATION MIX BY FUEL for a European country — how much power is coming from solar, wind, nuclear, gas, coal, hydro, biomass right now, with each fuel's MW and percentage share. Answers "what is Germany's generation mix", "how much of France's electricity is nuclear", "Germ…public_powerElectricity generation broken down by production type (solar, wind, nuclear, gas, etc.) for a country over a date range. Returns {unix_seconds, production_types:[{name, data}]}; each series' data array is timestamp-aligned to unix_seconds. Power in MW.electricity_priceDay-ahead spot electricity prices for a bidding zone over a date range. Returns {unix_seconds, price, unit}; the price array is timestamp-aligned to unix_seconds. Prices in EUR/MWh.total_powerTotal electricity generation / load for a country over a date range. Returns {unix_seconds, production_types:[{name, data}]}; data arrays are timestamp-aligned to unix_seconds. Power in MW.installed_powerInstalled generation capacity by production type for a country, as an annual or monthly series. Returns {time:["2002",...], production_types:[{name, data}]}; data arrays are aligned to the time array. Capacity in GW.renewable_shareRenewable share of a country's electricity LOAD, as a percent — how much of demand wind, solar, hydro and biomass are covering, now or over a past date range. Answers "what share of Germany's electricity is renewable right now", "how renewable was France's grid in July", "which days last month did…
Ready-to-paste client configs
Paste either block (or both) into your client config, e.g. claude_desktop_config.json or ~/.cursor/mcp.json. We only show a config when the install command is confirmed.
Energi Data Dk
{
"mcpServers": {
"energi-data-dk": {
"command": "npx",
"args": [
"-y",
"@pipeworx/mcp-energi-data-dk"
]
}
}
}
Energy Charts
{
"mcpServers": {
"energy-charts": {
"command": "npx",
"args": [
"-y",
"@pipeworx/mcp-energy-charts"
]
}
}
}
Frequently asked questions
Energi Data Dk is categorized under Environment & Nature and uses a local stdio subprocess. Energy Charts belongs to Environment & Nature and uses a local stdio subprocess. Pick Energi Data Dk for environment & nature work and Energy Charts for environment & nature.
Copy the mcpServers block from the config section on this page into your client's config (for example claude_desktop_config.json or ~/.cursor/mcp.json), then fully restart the client.
Energi Data Dk has no declared pricing — check the project's own site. Energy Charts has no declared pricing — check the project's own site. If a server needs environment variables such as API keys, define them under the env key in your client's MCP config.
Yes. MCP clients support multiple servers: add energi-data-dk and energy-charts as separate keys in the same mcpServers object, and your assistant will call tools from either one.
On AllMCPs, Energi Data Dk has a quality signal of 53/100 (Good) with 1 views, 0 installs and 0 GitHub stars. Energy Charts has 55/100 (Good) with 1 views, 0 installs and 0 GitHub stars.