Bernstein README

"To achieve great things, two things are needed: a plan and not quite enough time." - attributed to Leonard Bernstein

the open-source governance layer for AI agents

website · docs · install · first run · glossary · limitations · name policy · sponsor

简体中文 · 繁體中文 · 日本語 · 한국어 · हिन्दी · বাংলা · Русский · Español · Português · Deutsch · Français · Italiano · Nederlands · Polski · Svenska · Suomi · Українська · Türkçe · العربية · עברית · Bahasa Indonesia · Tiếng Việt · ไทย

Status: beta. Solo-maintained, under active development. The version number counts releases, not maturity - minor versions may change interfaces. Pin the version for anything you depend on; regressions get fixed fast, file them.

Bernstein is the open-source governance layer for AI agents. It runs on policy as code: you write the policy - who may do what, what needs approval, what must be recorded - and Bernstein enforces it and produces the verifiable record. A deterministic scheduler - no model in the coordination loop - runs agents in parallel, gates what they produce, and records every step, so a run can be verified after the fact, offline, from the artifacts alone. CLI coding agents work out of the box (Claude Code, Codex, Gemini CLI, and 40+ more), and the same layer governs any agent workload: the deliverable can be a diff, a research report, a dataset, or an audit evidence pack. Air-gap install profile included. Apache-2.0.

at a glance

Four things set it apart; everything after is detail.

• No LLM in the coordination loop. Scheduling is plain Python, so a run is reproducible end to end. Replay yesterday's plan and get yesterday's task graph.
• Checkable after the fact. The replay journal records every run, and the always-on lineage spine records every lineage-bearing step; the opt-in HMAC-chained audit log (BERNSTEIN_AUDIT=1) adds receipts you verify offline. Non-determinism surfaces as a hash mismatch at the exact step, not a flaky re-run. Non-code deliverables get the same treatment: a task can declare an artifact contract (report, dataset, action log, ops result) and completes on a signed lineage receipt rather than a git commit.
• Isolated by construction. Each coding task gets its own git worktree behind merge gates; artifact-mode tasks get a working directory under .sdd/workspaces/. Agents share no mutable workspace by default; the only shared state is the task backlog, which is claimed atomically. Stricter filesystem enforcement is opt-in, from the sandbox backends. Disable worktrees and every task runs in the shared checkout.
• Broad and local. 40+ CLI agent adapters plus a generic --prompt wrapper, file-based state, no SaaS hop, no third-party data plane.

The full list is on the capabilities page; the feature matrix is the exhaustive index.

what a run looks like

One YAML file declares the run: phases, roles, dependencies, and the conditions under which a node runs at all. The scheduler executes it as plain Python - nothing in the file is a prompt, and no model decides what happens next. This graph produces an audit evidence pack; the full file ships at .bernstein/workflows/audit-evidence-pack.yaml.

name: audit-evidence-pack
version: "1.0.0"

phases:
  - name: scope
    allowed_roles: [manager, architect]
  - name: collect
  - name: validate
    allowed_roles: [qa, security]
  - name: deliver
    allowed_roles: [security, manager]

nodes:
  define-control-inventory:
    phase: scope
    role: architect

  collect-audit-logs:
    phase: collect
    role: security
    depends_on: [define-control-inventory]

  # three more evidence streams collect in parallel:
  # collect-sboms-and-attestations, collect-runbooks-and-policies,
  # collect-eval-results

  assemble-pack:
    phase: validate
    role: docs
    depends_on:
      - collect-audit-logs
      - collect-sboms-and-attestations
      - collect-runbooks-and-policies
      - collect-eval-results

  mock-auditor-pass:
    phase: validate
    role: qa
    depends_on: [assemble-pack]

  remediate-findings:
    phase: collect
    role: docs
    depends_on:
      - source: mock-auditor-pass
        condition: "status == 'failed'"
    retry:
      max_attempts: 3
      until: "status == 'done'"

  sign-and-deliver:
    phase: deliver
    role: security
    depends_on:
      - source: mock-auditor-pass
        condition: "status == 'done'"

flowchart LR
    inv[define-control-inventory] --> logs[collect-audit-logs]
    inv --> sbom[collect-sboms-and-attestations]
    inv --> rb[collect-runbooks-and-policies]
    inv --> ev[collect-eval-results]
    logs --> pack[assemble-pack]
    sbom --> pack
    rb --> pack
    ev --> pack
    pack --> gate{mock-auditor-pass}
    gate -->|failed| fix["remediate-findings (retry x3)"]
    gate -->|done| sign[sign-and-deliver]

Each node is claimed by an agent whose role the phase allows; role fences and approval gates hold no matter what the agent does inside the task. A coding node completes behind merge gates in its own git worktree. The nodes above complete differently: an artifact contract names the deliverable (report, dataset, scan, action log), and the node finishes on a signed lineage receipt instead of a commit. Same scheduler, same journal, same offline verification - whether the graph ships code, research, an ops change, or a mix of all three. Ready-made graphs for software, research, docs, enterprise, and contributor workflows live in .bernstein/scenarios/.

install in 30 seconds

uv tool install bernstein    # or: pipx install bernstein
bernstein init
bernstein doctor             # checks a CLI agent is installed and authenticated
bernstein -g "fix the failing test in tests/test_foo.py"

pipx, pip, brew, dnf, npm, and Docker are covered in the install guide; the air-gapped wheelhouse has its own air-gap guide.

The recording above is a real run, and it ships with its own proof. The cast, the signed run receipt derived from that run's journal, and the public key that pins it all live in docs/assets/demo-run/. Verify the run you just watched, offline:

bernstein verify receipt docs/assets/demo-run/run-receipt.json \
    --public-key docs/assets/demo-run/run-receipt.pub.pem

CI re-verifies the committed receipt on every push to main — and proves a tampered copy fails — so the published evidence cannot rot into a decorative file. scripts/record_demo.sh regenerates the recording, receipt, and key from a fresh real run; nothing inside the terminal is synthesised.

A run in flight is watchable from either operator surface. Both read the same task API, so neither is a lagging mirror of the other. In bernstein live, the left and right columns scroll independently as whole panes, so widgets below the fold remain reachable in shorter terminals.

bernstein live — the terminal dashboard	bernstein gui serve — the browser dashboard

prove a run

Determinism here is something you check, not something you take on faith. Run once with audit enabled, then verify what was recorded:

BERNSTEIN_AUDIT=1 bernstein -g "fix the failing test in tests/test_foo.py"
bernstein replay list                 # run ids recorded on disk
bernstein replay latest --verify      # recompute the journal head, name the first divergent step
bernstein lineage verify <run_id>     # recompute the always-on lineage spine
bernstein audit verify                # HMAC chain + Merkle seal (written because audit was enabled)
bernstein audit diagnose <run_id> --signal gate --sign-key KEY
                                      # name the exact step a failure entered the run, as a signed receipt
bernstein verify run <run_id> --signing-key-path key.pem   # sign one portable run receipt
bernstein verify receipt .sdd/runs/<run_id>/run-receipt.json  # verify it offline: file only

The journal is written on every run; the lineage spine is always on and gains an entry for each lineage-bearing step, so a short run can finish with a valid, empty spine. bernstein audit verify only has a chain to check when the run was started with BERNSTEIN_AUDIT=1, a compliance preset, or bernstein run --audit. The --audit flag belongs to bernstein run; on the bernstein -g form above, set the environment variable.

One run receipt binds the journal head, the lineage-spine head when the run wrote spine entries, and, opt-in, an audit-chain range, under a single Ed25519-signed subject with the public key embedded. A reviewer holding that file and the operator's public key can confirm the embedded actions and chains were not changed: no HMAC key, no live .sdd/, and exit 2 naming the first divergent step on tamper. That receipt identifies the journal state it embeds; proving that state is the complete finished journal additionally requires an independent head/count seal. With the file alone and no --public-key pin, the check is integrity-only — it proves the receipt is internally consistent, not who signed it, and the verdict says so. Details in deterministic replay.

The same checkability applies to evaluation numbers. bernstein bench run <suite> --reliability k (also spelled bernstein eval --reliability k) runs every task k times under fixed coordination, then reports a pass^k floor (all k attempts must pass) alongside the pass@1 ceiling. That result is sealed in a signed receipt which bernstein bench reliability-verify recomputes offline, so a fabricated floor fails verification. Details: pass^k reliability floor.

how it works

Each goal moves through four stages:

1. Decompose. The manager breaks your goal into tasks with roles, owned files, and completion signals. One LLM call, then plain Python from there.
2. Spawn. Agents start in isolated git worktrees, one per coding task; an artifact-mode task gets a plain working directory instead. Main branch stays clean.
3. Verify. The janitor checks concrete signals: tests pass, files exist, lint clean, types correct.
4. Merge. Verified work lands in main. Failed tasks get retried or routed to a different model.

Why the scheduler is plain Python, and what that trades away: why deterministic.

everyday commands

cd your-project
bernstein init                    # creates .sdd/ workspace, bernstein.yaml + templates/
bernstein -g "Add rate limiting"  # agents spawn, work in parallel, verify, exit
bernstein live                    # watch progress in the TUI dashboard
bernstein run plan.yaml           # multi-stage plan: skip LLM planning, execute directly
bernstein stop                    # graceful shutdown with drain

The full operator surface (PR automation, schedules, chat bridges, the autofix daemon) is in operator commands.

bernstein workflow runs declarative YAML DAGs of agent, command, and loop nodes - with resume support for interrupted runs:

bernstein workflow run idea-to-pr -g "Add JWT auth"   # prints run_id
bernstein workflow resume <run_id>                    # picks up at the first non-completed node

Run state checkpoints to .sdd/runs/<run_id>/ on every node. Resume validates the manifest digest at run start, so a spec change is refused rather than silently executing a different manifest. See workflow manifests.

Repository hygiene gates: bernstein readme-l10n verify fails a PR whose translated READMEs drifted from the English source (naming the stale section), bernstein readme-l10n sync rebinds them after an English edit. See readme-l10n.

supported agents

Claude Code, Codex CLI, Gemini CLI, GitHub Copilot CLI, Cursor, Aider, Goose, Muse Code, OpenAI Agents SDK, Amp, Cody, Continue, Devin Terminal, Junie, Kilo, Kiro, AWS Q Developer, Ollama, OpenCode, OpenHands, Open Interpreter, gptme, Plandex, AIChat, Letta Code, Qwen, and more. The adapter index carries install commands for 30 of them. bernstein integrations list enumerates all 54 wired-in integrations from src/bernstein/adapters/registry.py, the single source of truth for what resolves. 52 of them are selectable agent adapters; the other two rows are the mock test stub and the self-hosted-endpoints endpoint profile. Anything else with a --prompt flag works through the generic wrapper.

Mix agents in the same run: cheap local models for boilerplate, heavier cloud models for architecture. bernstein integrations list --installed shows what is available on your machine.

volunteer compute

A project can mark issues as open to volunteers, and anyone can run one on their own machine without an account or a coordinator. The project declares what a task is allowed to do in a volunteer.json manifest - sandbox backend, network allowlist, wall-clock and memory ceilings - and a donor's own limits can only narrow that, never widen it. The receipt a finished task produces binds the result to the containment decision it ran under, so a maintainer can check months later what the work was actually permitted to touch.

bernstein volunteer verify .
bernstein volunteer browse --budget 60

The donor guide covers running a worker and the budget you set, the project guide covers declaring a manifest, and the threat model states what each boundary does and does not protect. The one-command runner is not shipped yet: verify, browse and hub are the working subcommands today.

beyond the front page

Everything deep lives on the docs site:

why the name?

Bernstein is named after Leonard Bernstein, the American conductor and composer. The project orchestrates a crew of CLI coding agents the way Bernstein conducted the New York Philharmonic: every player on cue, the score deterministic, the conductor accountable for the result.

i wrote bernstein because i was paying $400/month in claude bills running three coding agents in parallel and getting nondeterministic merges. Apache 2.0, solo maintained. Live stats: bernstein.run.

mentioned in

Listed in vinta/awesome-python, covered in Augment Code's open-source agent orchestrators roundup, and listed in Python Weekly #742. We also wrote up the approach as the deterministic zero-LLM orchestration pattern in awesome-agentic-patterns.

contributing, support, license

PRs welcome; CONTRIBUTING.md has setup and code style. Security reports go through SECURITY.md. If Bernstein saves you time: GitHub Sponsors. Contact: forte@bernstein.run.

Citation metadata lives in CITATION.cff. License: Apache-2.0; the project name is covered separately in TRADEMARKS.md.

Alex Chernysh · GitHub · X · bernstein.run