GeneXus MCP Server — Multi-version GeneXus for Claude, Cursor, and AI Agents

¿Hablás español? → Guía de inicio en español Fala português? → Guia de início em português Stuck? → Troubleshooting guide

GeneXus MCP Server lets AI agents — Claude Desktop, Claude Code, Cursor, Antigravity, and any MCP-compatible client — read, edit, analyze, and refactor objects inside a Knowledge Base supported by the selected GeneXus SDK. It talks to the native GeneXus SDK, so the agent works with the real KB, not a copy or a parsed approximation.

In practice: you point the MCP at your KB, then ask your AI assistant things like "list all transactions with attribute CustomerId", "add a rule to the Order transaction that validates the total", or "refactor this procedure to use the new SDT" — and it does it.

Multi-version SDK support

The same MCP distribution supports the SDK majors listed in the generated compatibility document. Each configured MCP process selects one installed SDK with --gx; no separate MCP installation is required. The commands below are examples of switching the existing configuration, not running two majors in the same process:

npx genexus-mcp@latest init --kb "C:\KBs\KBTeste17" --gx "C:\Program Files (x86)\GeneXus\GeneXus17Trial"
# To switch this MCP configuration to GX18:
npx genexus-mcp@latest init --kb "C:\KBs\MyGX18KB" --gx "C:\Program Files (x86)\GeneXus\GeneXus18"

After switching the SDK or KB, fully restart the AI client so it reloads the MCP process and its tool schemas. If GX17 and GX18 must run simultaneously, use separate MCP configurations and ports.

init also reads the KB .gxw major and the selected GeneXus.exe metadata. It aborts before writing config.json when the majors conflict or an automatic selection cannot be verified. genexus-mcp doctor exposes the same result as the kb_sdk_compatibility check. For a disposable fixture, the live-KB harness includes a catalog-driven matrix that checks every supported major against one published artifact.

The Gateway reports the detected SDK through genexus_whoami:

• geneXus.supportedMajors: explicitly validated SDK majors from the version catalog
• geneXus.matchedMajor: the major detected for the configured installation
• geneXus.versionMatches: whether the detected installation is in that catalog
• geneXus.supportedMajor: retained as the legacy single-major alias for the catalog primary

The Worker isolates version-sensitive SDK members behind compatibility adapters. For example, Design System helper methods that differ between SDK majors are replaced field-by-field by parsing the native Tokens and Styles parts when needed. Existing tool names, arguments, and MCP client configuration formats do not change.

Supported SDK majors: GeneXus 17, GeneXus 18. Primary SDK: GeneXus 18. Source of truth: config/gx-versions.json.

To add another GeneXus major in the future, add it to the explicit version catalog only after compiling the Worker with that SDK and passing the focused tests plus a live KB smoke. This prevents the server from claiming compatibility based only on a version string.

What you can do with it

A quick map of what the agent can do against your real KB through the 50 tools (details in Tool Surface):

It works through the native GeneXus SDK — the same code paths the IDE uses — so edits are real and validated, not text hacks on KB files.

Prerequisites

Before you start, make sure you have:

• ✅ Windows (GeneXus is Windows-only)
• ✅ A supported GeneXus SDK installed locally (see docs/generated/supported-versions.md; pass another install path explicitly when needed)
• ✅ GeneXus 18 installed locally (the primary supported SDK; other catalogued majors are also supported)
• ✅ A Knowledge Base created with a supported GeneXus major and opened at least once in the IDE (so it's initialized)
• ✅ Node.js 22+ — check with node --version in a terminal; install from nodejs.org if missing
• ✅ An MCP-compatible AI client — Claude Desktop, Claude Code, Cursor, Antigravity, etc.

You do not need to clone this repo or install anything globally — npx handles it.

Never used a terminal before? Press Win+R, type powershell, hit Enter. That's your terminal.

Quickstart (3 steps, ~5 minutes)

Find your two paths first

Before running the installer, note these down:

1. GeneXus install folder — where GeneXus.exe lives. Usually C:\Program Files (x86)\GeneXus\GeneXus18.
2. Your KB folder — the root folder of your Knowledge Base (contains the .gx file and subfolders like Model/, WebSpa/).

Not sure where your KB lives? Open it in GeneXus and check the title bar, or look in File → Recent.

Step 1 — Run the installer

Open a terminal and run, replacing the paths with your KB folder and your GeneXus install:

npx genexus-mcp@latest init --kb "C:\KBs\YourKB" --gx "C:\Program Files (x86)\GeneXus\GeneXus18"

Prefer the wizard? Run npx genexus-mcp@latest init --interactive and answer the prompts.

What you'll see (takes ~30 seconds first time, faster on re-runs):

1. npx downloads the package.
2. The installer verifies the paths exist and GeneXus is present.
3. It auto-detects which AI clients you have installed and adds the MCP config to each one.
4. Prints a JSON snippet at the end — keep it in case you need to configure a client manually.
5. Finishes with 🎉 You are all set!.

On Windows, Antigravity is registered with the gateway executable bundled in the current npm package when that artifact is available, so it skips the npx bootstrap chain on every MCP handshake. That path follows the package in the npx cache; after an upgrade, run npx genexus-mcp@latest clients add --clients antigravity again if genexus-mcp clients reports a stale launcher. Other clients keep the npx genexus-mcp@latest launcher unless you use the fixed-path installer below.

Step 2 — Register the MCP in your AI client

Step 1 auto-registers every supported client it detects, including Claude Desktop, Claude Code, Cursor, Antigravity, Gemini CLI, OpenCode, Codex CLI, and VS Code. If yours wasn't detected, copy the JSON snippet from Step 1 into your client's MCP config manually. See the client setup guide if unsure where that file lives.

Step 3 — Restart your AI client, then test

This part trips most people: fully close your AI client and reopen it. Not just the window — the whole process.

• Claude Desktop: right-click the system-tray icon → Quit. Then launch it again. (Closing the window is not enough.)
• Claude Code: end the session and start a fresh one.
• Cursor / Antigravity: close all windows and reopen.
• OpenCode: fully quit and reopen it so it reloads opencode.json / opencode.jsonc.
• Gemini CLI / Codex CLI: start a new process or session.

Then paste this prompt:

"Using the GeneXus MCP, list the first 5 objects in my KB and show name + type."

What should happen:

• The AI invokes the genexus_list_objects tool (some UIs show "calling tool…").
• A few seconds later, you get a list of objects from your KB.

If you get a list back — you're done. Skip to What can I ask the AI? for ideas.

If the AI says it doesn't have a GeneXus tool, or nothing happens, go to Troubleshooting — most issues are covered there.

🤖 Let your AI install it for you

If you'd rather not run anything in the terminal yourself, paste this into your AI chat:

Please configure the GeneXus MCP server. Run npx genexus-mcp@latest init --kb "<MY_KB_PATH>" --gx "<MY_GENEXUS_PATH>" in the terminal. If I haven't told you my GeneXus path and KB path yet, ask me first. Once it succeeds, read the JSON block it printed and add it to my MCP client config. Tell me when I should restart the client to start using GeneXus tools.

Replace the placeholders or let the AI ask you for them.

Corporate install (fixed path, ASR-friendly)

If your machine has Microsoft Defender ASR, SmartScreen, or another endpoint policy blocking unsigned binaries, the default npx flow is painful — npx caches the package under %LOCALAPPDATA%\npm-cache\_npx\<hash>\..., and the <hash> changes per version, so IT can't whitelist a stable path without a wildcard over the whole npm cache (which is too broad).

Use the corporate installer instead. It extracts the binaries to a stable directory and registers the AI clients to launch the gateway directly from there — npx is never on the runtime path.

# One-liner — installs latest release, registers AI clients
iex (irm https://raw.githubusercontent.com/lennix1337/Genexus18MCP/main/scripts/install.ps1)

# With explicit KB and GeneXus paths
$s = irm https://raw.githubusercontent.com/lennix1337/Genexus18MCP/main/scripts/install.ps1
& ([scriptblock]::Create($s)) -Kb "C:\KBs\MyKB" -Gx "C:\Program Files (x86)\GeneXus\GeneXus18"

Install location:

• Admin shell → C:\Tools\GenexusMCP\
• Non-admin shell → %LOCALAPPDATA%\Programs\GenexusMCP\

Paths to give to IT for the ASR / Defender exclusion list:

<InstallDir>\GxMcp.Gateway.exe
<InstallDir>\worker\GxMcp.Worker.exe

Re-run the same one-liner later to upgrade — it detects the installed version (version.txt in the install dir) and downloads only if a newer release is available. Use -Force to reinstall the same version, -Version v2.3.0 to pin a specific tag, -NoClient to skip AI client registration. Node.js 22+ must be installed for client registration; without it the script still extracts the binaries but you'll need to edit the client config (claude_desktop_config.json etc.) manually.

What can I ask the AI?

Once installed, here's what unlocks. Try these as your first prompts:

Exploration

• "List all objects of type Procedure in the KB."
• "Show me the source of the procedure CalculateInvoiceTotal."
• "Find all transactions that reference the attribute CustomerId."

Editing

• "Add a rule to the Order transaction: error('Total must be positive') if Total < 0."
• "Add a new attribute CreatedAt of type DateTime to the Customer transaction."
• "Rename the variable &qty to &quantity in procedure CreateOrder."

Data model authoring (no IDE round-trip)

• "Make CustomerEmail unique on the Customer transaction." (creates a unique index)
• "Turn CustomerBalance into a formula: sum(InvoiceAmount)."
• "Add the enum values Active/Inactive/Pending to the Status domain."
• "Add a property apiKey and a method Connect(url) to the PaymentGateway external object."
• "Add a menu option 'Customers' to MainMenu that opens CustomerWW."

WorkWithPlus pattern editing (full structural + theming control)

• "Add a typed tab with variables, an action, and nested responsive tables to a WorkWithPlus WebPanel."
• "In WorkWithPlusOrder, add a 'Duplicate' button to the transaction view alongside Save/Cancel/Delete."
• "Group the Customer transaction attributes into a 'Contact Info' section with theme class GroupTelaResp."
• "On the WorkWithPlusInvoice list, add a new ordering by InvoiceDate descending."
• "Style the Save button on WorkWithPlusOrder with buttonClass='btn ButtonGreen' and apply BigTitle to the form header."
• "Remove the Export action from the Selection grid of WorkWithPlusReport."
• "Read the Documentation part of the transaction Customer and rewrite it in markdown."

Analysis

• "Explain what the procedure ProcessShipment does." — genexus_analyze mode=explain is a compatibility-only envelope and returns NotImplemented; use mode=summary, mode=context, or genexus_read for supported analysis and source.
• "What SQL does the query in WebPanel CustomerList generate?"
• "Summarize the structure of the Sales module."

Build & lifecycle

• "Build the KB and report any errors."
• "Run the unit tests and show me which failed."

The agent picks the right tool from the 50 tools the MCP exposes (read, edit, refactor, analyze, build, data-model authoring, layout automation, DB/DDL, versioning, security, SQL preview, etc.). The full tool list is in Tool Surface below.

Supported AI clients

Auto-detected and auto-configured by the installer:

Run npx genexus-mcp clients at any time to see which agents are installed, which have genexus registered, and whether any point at a stale gateway exe. To (re)register specific ones: npx genexus-mcp clients add --clients antigravity,vscode.

OpenCode Desktop

OpenCode Desktop shares its MCP configuration file (opencode.jsonc or opencode.json) with OpenCode CLI. Running genexus-mcp init --write-clients or genexus-mcp clients add --clients opencode-desktop automatically registers genexus18mcp in the shared config. After registration, fully restart OpenCode Desktop so it reloads its MCP configuration.

Troubleshooting

First stop for any "the agent doesn't see GeneXus" problem: npx genexus-mcp clients (is it registered? does it point at a gateway exe that still exists?) and npx genexus-mcp doctor --mcp-smoke.

Most install issues fall into a handful of buckets — see TROUBLESHOOTING.md for fixes:

• Installer can't find GeneXus or the KB
• AI client doesn't see the GeneXus tools after restart
• "Worker failed to start" / .NET 4.8 errors
• KB build errors / locked artifacts
• Port 5000 already in use
• Permissions on %LOCALAPPDATA%\GenexusMCP\
• Antigravity only shows exit status 1 / 0xffffffff with no useful stderr

When a stdio launcher fails before the client can retain stderr, the wrapper writes the last failure to %LOCALAPPDATA%\GenexusMCP\logs\last-stdio-error.txt. It contains the UTC timestamp, exit code, and bounded stderr tail. genexus-mcp doctor reports the same path when a previous failure is present. Read it before changing the install or using a global npm install; if the Antigravity launcher is stale, re-register it with npx genexus-mcp@latest clients add --clients antigravity.

Still stuck? Open an issue with the output of npx genexus-mcp doctor --mcp-smoke.

Tool Surface

The worker exposes 50 tools to the MCP router, grouped by capability below. Most are umbrellas with an action (e.g. genexus_db action=sql_ddl); the detailed schemas live in src/GxMcp.Gateway/tool_definitions.json.

Orientation & health

• genexus_whoami — KB context, version, worker/index/database health, self-update check, next-step hints
• genexus_doctor — connection + install + cache health check
• genexus_recipe — named playbooks / self-extending macros
• genexus_telemetry — observability (metrics, latency, errors)

Search & discovery

• genexus_query — object search (prefixes name:, type:, usedby:, parent:, …)
• genexus_list_objects — paginated object listing with aggregates
• genexus_read — read any part of an object (source, structure, rules, events, docs, pattern XML, …)
• genexus_inspect — one-shot object snapshot (metadata, variables, structure, signature, callers)
• genexus_search_source — regex/semantic search across Procedure/DataProvider/WebPanel/Transaction source
• genexus_navigation — the IDE "View Navigation" report

For a GeneXus 18 U16 Data Selector, genexus_read type=DataSelector also accepts parameters, conditions, orders, definedBy, baseTransaction, baseTable, and structure. It preserves SDK order and complete expressions, returns a versionToken, and performs no lifecycle operation. The public U16 SDK does not expose a projected-attribute collection or resolved joins for this object type, so projection and joins are returned in unsupportedParts with the technical reason instead of misleading empty arrays. Base objects and declared indexes are reported only when they can be resolved without Specify. structure.expression is identified as a semanticProjection: it combines the typed public SDK elements and never exposes the internal collection type names produced by DataSelectorStructurePart.ToString() on U16.

Editing

• genexus_edit — edit any object part; modes full / patch / ops
• genexus_edit_and_build — edit + optional specification + rebuild callers in one call, with compensating rollback on validation failure
• genexus_edit_form — semantic WebForm edits
• genexus_variable — Variables-part CRUD
• genexus_create — creation umbrella (Transaction, Procedure, Domain, SDT, API, Folder, Module, curl_procedure = scaffold a Procedure from a curl command, …); object_atomic authors definition + variables + Rules + properties + Source with preflight/read-back/rollback
• genexus_data_view — atomically create/inspect/update/delete a root-only Business Component Transaction mapped through a native Data View to an existing physical table; validates attributes/keys first, supports optimistic versions and true no-mutation dry-runs, requires confirm=true for destructive delete, and reports commit/verification state separately
• genexus_delete_object — delete an object by native SDK identity; use dryRun=true to inspect incoming references before confirm=true
• genexus_format — format a code snippet with the worker's rules

Data model & structure authoring

• genexus_structure — read/write the data model: get_visual/get_logic, update_visual (structure DSL), create_index/drop_index (unique/non-unique indexes — the GeneXus way to enforce uniqueness), set_attribute (Formula, subtype, Title/ColumnTitle, IsCollection, basedOnDomain), set_level (level Description/Image attribute), set_domain (edit an existing Domain's enum values / base type). For create_index, dryRun:true validates and returns the projected diff without saving; use the versionToken from get_indexes as baseVersion for concurrency protection. A real write is re-read and verified exactly, with snapshot rollback on failure. It never triggers Specify, Generate, Build, Rebuild, compilation, reorganization, execution, or tests.
• genexus_authoring — members of object types the structure DSL doesn't cover: add_external_method/add_external_property (External Objects), add_menu_option (Menus)
• genexus_properties — read/update object-level properties
• genexus_generator_reference — list/preview/add/remove native .NET generator references with managed-assembly validation, optimistic concurrency, save/re-read verification, and exact full-snapshot rollback; never runs lifecycle actions implicitly

Refactor, patterns & compare

• genexus_refactor — rename, extract procedure, WWP condition set
• genexus_apply_pattern — apply a GeneXus pattern (WorkWith, WorkWithPlus, …); mode=actions manages typed WorkWithPlus grid actions and Action Groups
• genexus_wwp — typed WorkWithPlus editing: Action Groups, atomic native add_grid_attribute, plus add_tab, move_tab, and remove_tab for WebPanel tabs and typed children
• genexus_compare — IDE "Compare Objects" parity (IComparerService)
• genexus_merge — 2- or 3-way object merge (IMergeService)

Analysis, docs & API

• genexus_analyze — cross-object semantic analysis (impact, dependencies, complexity, naming, code_metrics, summary, kb_stats = KB activity/freshness, table_relations = table↔transaction relations + redundant attrs, …). mode=explain is compatibility-only: it preserves the legacy response envelope and returns NotImplemented; use mode=summary, mode=context, or genexus_read instead.
• genexus_doc — generate wiki / dependency graphs / health reports
• genexus_api — introspect REST endpoints exposed by HTTP procedures
• genexus_security — audit KB security: audit_gam (env/GAM props), scan_secrets (regex over Source), scan_native (the SDK's own Security Scanner, ISecurityScannerService)

Lifecycle, build, test & DB

• genexus_lifecycle — directed build (incl. compile_check), incremental global build_all, forced global rebuild, validate, index, reorg, and poll status
• genexus_test — run native GXtest tests
• genexus_db — DB umbrella: schema-drift, sql_ddl/sql_navigation, static index advisor, sample_data, typed Transaction record query/insert/update with dry-run, optimistic versioning, reread and verified rollback, Domain/SDT type introspection, translation import, reorg_impact, and non-mutating reorg_preview with exact DDL only from a current Impact Analysis artifact
• genexus_deploy — deploy application (IDeploymentService): list_targets (read) / deploy (destructive, confirm=true)
• genexus_run_object / genexus_browser — resolve runtime URL and headless-browser verification

Native layout / UI

• genexus_layout — SDK layout/WebForm ops (get_tree, find_controls, set_property, add_printblock, get_preview, list_controls = control/theme-class catalog, design_system = DSO tokens/classes/images, …)

KB pool, versioning & team dev

• genexus_kb — multi-KB pool (list/open/close/set_default)
• genexus_module — Module Manager (IModuleManagerService)
• genexus_kb_version — model version/branch management (Create/Activate/Revert)
• genexus_versioning — versioning umbrella (git-style history over the KB)
• genexus_gxserver — GXserver / Team Development sync, incl. pipeline_* (CI pipelines via IContinuousIntegrationService)
• genexus_transfer — real XPZ export/import (IKnowledgeManagerService, dependency-aware): export / inspect / import
• genexus_memory — per-KB fact store for the agent

Security provisioning, IO & meta

• genexus_gam — GAM / integrated-security provisioning (IIntegratedSecurityService)
• genexus_io — assets, part-text exchange, screenshots, OCR
• genexus_sdk_probe — dump the live SDK surface (types/methods/props) for capability discovery
• genexus_worker_reload — hot-swap the worker without restarting the client

Multi-KB (v2.3.0+): every non-meta tool takes an optional kb argument (alias or absolute path). The gateway can hold up to Server.MaxOpenKbs (default 3) KBs open at once, each in its own Worker process — calls to different KBs run truly in parallel. See Advanced Configuration for the KBs[] schema.

WorkWithPlus & theming (via genexus_read / genexus_edit)

• Full read/write of PatternInstance / PatternVirtual XML: containers (<table>, groups), controls (<textBlock>, <attribute>, <gridAttribute>, <filterAttribute>, <errorViewer>), actions (<standardAction>, <userAction>), grids, orders, rules, event blocks. Transaction and Selection views are addressable independently.
• Documentation (markdown) and Help (HTML) are first-class write targets.
• Apply real ThemeClass values (themeClass, buttonClass, groupThemeClass, …); discover them with genexus_list_objects --typeFilter ThemeClass.

Edit modes (genexus_edit): full (whole-part replacement, default), patch (Replace/Insert_After/Append over a context anchor — works on source code AND pattern XML), ops (typed semantic ops like set_attribute, add_rule for source-bearing parts).

Pattern XML auto-reconcile: WorkWithPlus encodes IDE rendering order in a per-parent childrenOrderedList attribute. The MCP now rebuilds (and creates if missing) every list from the actual XML child order on each write — callers only describe where an element goes in the tree and the MCP makes the IDE render it there. The response includes a childrenOrderedListReconciliation block listing each (re)written parent plus any structural elements that couldn't be inferred safely.

Safe by default: all write tools accept dryRun: true (returns a preview without mutating the KB) and idempotencyKey (safe retries; concurrent calls coalesce, results cached 15 min).

WorkWithPlus pattern editing — what you can actually do

WorkWithPlus patterns are XML documents that drive Transaction-and-Selection screens. The MCP exposes the entire surface so an agent can design or restructure a screen without opening the IDE:

Recommended workflow for a screen redesign:

1. genexus_list_objects --typeFilter ThemeClass --nameFilter Button — discover the actual button classes available in this KB (ButtonGreen, ButtonBlue, ButtonRed, etc — names vary per KB).
2. genexus_read --name WorkWithPlus<Object> --part PatternInstance — get the current XML.
3. Edit the XML in memory (LLM): wrap attributes in a <table isGroup="True" title="…" groupThemeClass="GroupTelaResp">, reorder buttons, add a new <standardAction>, attach buttonClass="btn ButtonGreen", etc.
4. genexus_edit --mode full --part PatternInstance --content "<new xml>" — the MCP rewrites the part, reconciles childrenOrderedList on every container, and verifies the round-trip.
5. Read back to confirm; refresh the GeneXus IDE to see the result.

Custom buttons use <userAction>, not <standardAction>. Trn_Enter / Trn_Cancel / Trn_Delete are the only registered standard actions on a WorkWithPlus transaction; any custom button (Duplicate, Audit, Export, etc.) must be a <userAction caption="…" name="…" buttonClass="btn ButtonGreen" confirm="False" />. The MCP's reconciler treats <userAction> as a peer of <standardAction> (same typeCode 17/18 by context), so they coexist in the same TableActions row and the IDE renders them side-by-side.

For WebPanel tabs, prefer the native typed operation instead of whole-XML replacement:

{
  "action": "add_tab",
  "name": "SamplePanel",
  "controlName": "IntegrationV3",
  "title": "Integration API V3",
  "position": 5,
  "children": [
    { "type": "variable", "name": "Operation", "basicType": "VarChar", "length": 40 },
    { "type": "userAction", "name": "SendIntegration", "caption": "Send" }
  ],
  "dryRun": true
}

The dry-run returns a typed diff and versionToken. Pass it as baseVersion on the persisted call. The write uses Pattern SDK element commands, requires exact PatternInstance/WebForm snapshots, preserves Apply-on-save, re-reads the PatternInstance, projects and re-reads the parent WebForm, and rolls both parts back on any failed confirmation. It never invokes lifecycle operations.

Things to know (orientation, not gotchas):

• WorkWithPlus normalizes some attributes after every save. Certain fields are bound to the underlying transaction (e.g., title on top-level groups derives from the transaction's friendly name). When "Apply this pattern on save" is enabled on the WorkWithPlus object, the engine recomputes those fields — same behavior whether you edit in the IDE or via MCP. To make a hard override stick, toggle that flag via MCP:
  JSON Config

  Copy

  { "tool": "genexus_properties",
    "arguments": { "action": "set", "name": "WorkWithPlus<Object>",
                   "propertyName": "SDPlus_Editor_Apply_On_Save", "value": "False" } }
  

  Accepts "True" | "False" | "Default" (Default inherits the KB-level setting). Set back to "Default" to re-enable engine recomputation. Validated live in this repo.
• Structural safety is enforced by the SDK. If you submit XML that violates pattern invariants (e.g., a <transaction> without a <level>, or a <standardAction> whose name isn't a registered action), the SDK rejects the save and the MCP returns the exact error so you can fix the input. The KB never ends up half-written.
• The IDE Pattern preview is a structural mockup, not a styled render. Theme CSS (buttonClass, themeClass, fonts, colors) is resolved at runtime, not in the preview canvas — so even after a successful MCP write the preview pane will look generic. To verify styling: open the element in the IDE tree and check the right-hand Properties panel (the applied classes show there), or hit Run / Live Editing to see the real CSS. This is GeneXus IDE behavior, independent of how the pattern was edited.

AXI CLI (for agents and automation)

The genexus-mcp command itself is also an agent-facing CLI with token-optimized output:

genexus-mcp status               # gateway/worker state
genexus-mcp doctor --mcp-smoke   # health check + protocol probe
genexus-mcp tools list           # list available tools
genexus-mcp config show          # current resolved config
genexus-mcp layout status        # native layout automation state

Global flags: --format toon|json|text · --fields f1,f2,... · --limit N · --query <text> · --quiet · --no-color.

Full contract: docs/axi_cli_contract.md. Best-practices playbook: docs/llm_cli_mcp_playbook.md.

Advanced Configuration

The installer writes a config.json for you. To customize networking, timeouts, or shadow paths:

{
  "Server": {
    "HttpPort": 5000,
    "BindAddress": "127.0.0.1",
    "SessionIdleTimeoutMinutes": 10,
    "WorkerIdleTimeoutMinutes": 60,
    "MaxOpenKbs": 3
  },
  "GeneXus": {
    "InstallationPath": "C:\\Program Files (x86)\\GeneXus\\GeneXus18",
    "WorkerExecutable": "worker\\GxMcp.Worker.exe"
  },
  "Environment": {
    "DefaultKb": "main",
    "KBs": [
      { "alias": "main",   "path": "C:\\KBs\\YourKB" },
      { "alias": "legacy", "path": "C:\\KBs\\OtherKB" }
    ]
  }
}

Backward compatibility: old configs with a single Environment.KBPath keep working — the gateway auto-migrates them to KBs[] + DefaultKb at load time.

Working with multiple KBs

Once you declare more than one KB in Environment.KBs[], every tool accepts an optional kb argument:

// LLM example: list procedures in two KBs in parallel
{ "tool": "genexus_list_objects", "arguments": { "kb": "main",   "type": "Procedure" } }
{ "tool": "genexus_list_objects", "arguments": { "kb": "legacy", "type": "Transaction" } }

Resolution rules when kb is omitted:

• an explicit kb always wins; use it for parallel work or when a prompt touches more than one KB
• each MCP session snapshots the configured DefaultKb at initialize; set_default changes the current session and persists the startup fallback for future sessions
• open only starts/registers a Worker; it does not silently change another session's target. Select it with set_default, or pass kb explicitly
• exactly 1 KB open → uses that KB when the session has no selection
• 2+ KBs open with no session selection → server returns KB_AMBIGUOUS; choose one with set_default or pass kb explicitly

Manage the pool at runtime:

{ "tool": "genexus_kb", "arguments": { "action": "list" } }
// → { selectedKb, activeKb, openKbs: [{alias, path, pid, workingSetMB, idleSeconds}], knownKbs, maxOpenKbs, defaultKb, declaredKbs }

{ "tool": "genexus_kb", "arguments": { "action": "open", "alias": "adhoc", "path": "C:/KBs/ScratchKB" } }
{ "tool": "genexus_kb", "arguments": { "action": "close", "alias": "legacy" } }
{ "tool": "genexus_kb", "arguments": { "action": "set_default", "alias": "main" } }   // persists to config.json

For OpenCode, call genexus_whoami once at the start of a session. Use kb.selected, kb.default, kb.openKbs, kb.knownKbs, and kb.declaredKbs to understand the target, then select the normal working KB with genexus_kb action=set_default. Every KB-bound response also includes kbAlias in its JSON payload, which lets OpenCode correlate text-only responses. Keep kb=<alias> on calls that intentionally compare or update another KB.

The installer registers both OpenCode configuration layouts: the legacy direct mcp.genexus entry used by OpenCode 1.x and the current mcp.servers.genexus layout. clients add --clients opencode is only needed to repair or explicitly re-register a client after installation; normal init handles detected clients automatically. Restart OpenCode after a registration so it reloads the MCP configuration.

When the pool is full and no Worker is idle, the server returns KB_POOL_FULL — close one explicitly or raise Server.MaxOpenKbs. Each Worker carries the SDK in its own process (~200–400 MB idle, up to 1–2 GB on heavy KBs), so size the pool against available RAM.

Architecture

graph LR
    A[AI Client / Nexus-IDE] -->|MCP stdio or HTTP /mcp| B[Gateway .NET 10]
    B -->|JSON-RPC over process boundary| C[Worker .NET Framework 4.8]
    C -->|Native SDK| D[GeneXus KB]

• Worker pool (v2.3.0+): one .NET 4.8 Worker process per open KB, capped by MaxOpenKbs (default 3). Workers are spawned lazily, recycled by WorkerIdleTimeoutMinutes, and evicted LRU when the pool is full.
• Cross-KB parallelism: tool calls to different KBs run on different Worker processes and never block each other. Calls to the same KB are still serialized by the GeneXus SDK's STA requirement.
• Gateway reuse: multiple IDE instances share one gateway via lease files at %LOCALAPPDATA%\GenexusMCP\gateway-leases.
• HTTP mode: also available at http://127.0.0.1:5000/mcp with SSE. Header: MCP-Protocol-Version: 2025-11-25.

Development & building from source

Want to contribute or run a local dev build?

1. Clone this repo on Windows.
2. Run .\build.ps1 to restore and build the C# components and package the local artifacts. The script checks for the required .NET SDK and GeneXus 18 installation.
3. If GeneXus is installed outside the default path, set $env:GX_PATH to its installation folder before running the build. A Knowledge Base is only needed for runtime testing.

Bundled AI skills (.gemini/skills/)

This repo ships a set of agent skills under .gemini/skills/ that any MCP-compatible client with skill support (Gemini CLI, Claude Code via plugin, etc.) can load to ground its GeneXus reasoning:

Third-party skills are Apache 2.0 (see .gemini/skills/NOTICE.md). To refresh against upstream, follow the steps in NOTICE.md.

Nexus-IDE (VS Code extension — optional, not auto-installed)

src/nexus-ide is a lightweight, experimental VS Code extension in the repo. The installer no longer packages or installs it — VS Code is wired up as a native MCP client instead (see Supported AI clients). If you want the extension, build and install it manually:

cd src/nexus-ide; npm ci; npm run compile
npx --yes @vscode/vsce package --out nexus-ide.vsix
code --install-extension nexus-ide.vsix --force

It provides a virtual filesystem (genexus:// scheme), a KB explorer with multi-part editing, and MCP discovery commands.

Automated release

• Workflow: .github/workflows/release.yml
• Trigger: push to main with a package.json version bump
• Behavior: publishes to npm if version is new + creates a GitHub Release tagged v<version>
• Required secret: NPM_TOKEN

License

MIT — see LICENSE.

Search keywords: GeneXus MCP · GeneXus 18 MCP · GeneXus AI · GeneXus Claude · Model Context Protocol GeneXus · GeneXus low-code AI agent · GeneXus Cursor · GeneXus Antigravity