FitFileSize

Live at fitfilesize.com.

Compress a PDF or image to fit under a target file size. Built for the "this portal only accepts files under 4 MB" problem: pick a target, get a file that actually fits, or an honest report of the smallest achievable size.

Accepts PDF, JPEG, PNG, WebP, TIFF, BMP and HEIC (iPhone photos, which come back as JPEG).

The site is FitFileSize; the Python package, CLI and FITPDF_* settings keep the original name, fitpdf.

How it works

The same three steps regardless of what you feed it:

1. Lossless pass first. For PDFs that is object streams, stream recompression and unused-resource removal (pikepdf). For JPEGs it is an optimised re-encode that reuses the existing DCT coefficients, so the pixels are untouched and only metadata is dropped. Sometimes this alone is enough.
2. If still over target, binary-search a ladder of increasingly aggressive settings for the gentlest one that fits. PDFs step down Ghostscript image DPI and JPEG quality; images step down pixel dimensions and JPEG quality, and a PNG, TIFF or BMP steps down pixel dimensions at 256 colours so it keeps its format. Twelve rungs are searched in at most four attempts.
3. If even the harshest rung cannot fit, you get the smallest achievable file plus a clear "floor" warning instead of a silent failure.

Exact pixel size (images). Exam and ID forms often want both, say 200 x 230 pixels and under 50 KB. Given a width and height, the image is cropped to fill that frame (or padded onto white, if asked) and the ladder becomes JPEG quality alone at that size. The lossless pass and the "already small enough" shortcut are skipped, since neither changes the size.

Only step 1, the ladder's contents, and "render one rung" differ per media type. Those live behind one protocol in src/fitpdf/strategies.py, so the search itself is written once. Adding a third media type means implementing four methods, not touching the search.

Install

Requires Python 3.10+. Ghostscript is needed for the PDF path only; images work without it.

# Windows
winget install ArtifexSoftware.GhostScript

# Debian/Ubuntu (and WSL2)
sudo apt install ghostscript

Then:

pip install -e ".[dev]"

If Ghostscript is not on PATH, point to it with the FITPDF_GS env var.

Use

fitpdf scan.pdf -t 4mb            # fit under 4 MB
fitpdf photo.jpg -t 500kb         # images work the same way
fitpdf scan.pdf -t 500kb -o out.pdf
fitpdf scan.pdf                   # lossless-only pass

Every image keeps its format. A PNG, TIFF or BMP drops to 256 colours at full size first, then fewer pixels; a WebP steps size and quality down like a JPEG, saved as WebP. If nothing fits you get the smallest file, still in its own format. The one exception is an exact pixel size (the API's width and height, which the site's form pages use), which always produces the JPEG such forms require.

Exit codes: 0 target hit, 2 floor reached (target not possible), 1 error.

Web service

A React UI with drag-and-drop upload, a target-size slider bounded by an estimated floor (the smallest the file can likely go), live progress while the ladder runs, and download links that self-destruct minutes after the run finishes (see Retention below).

Architecture

browser ──▶ nginx (SPA + /api proxy) ──▶ FastAPI ──▶ Redis ──▶ RQ worker
                                            │          │          │
                                            └──── shared job volume ────┘

Four pieces, each with one job:

• src/fitpdf/ is the engine: pure Python, no web framework, driven either by the CLI or the API. engine.py holds the media-agnostic search; strategies.py holds everything that knows about a specific file format. Neither knows anything about HTTP.
• src/fitpdf/web/ is a thin API over it. Uploads land on a shared volume, work is enqueued, and nothing blocks the request thread.
• The worker runs Ghostscript out-of-process. A compression can take minutes and can be killed by a timeout, so it must not live inside a request.
• frontend/ is a Vite + React + TypeScript SPA. Its types are a hand-maintained mirror of the API in frontend/src/types/api.ts.

Progress reaches the browser over Server-Sent Events rather than polling. Events are appended to a Redis list and replayed from an offset, so a client that connects late, reconnects, or reloads still sees the whole run.

Running it

The whole stack, including the frontend, in one command:

docker compose up --build

Then open http://localhost:5173. The API is also exposed directly on port 8000.

For frontend work you want the Vite dev server instead, with hot reload. Start the backend however you like, then:

cd frontend
npm install
npm run dev

That serves on port 5174 and proxies /api to localhost:8000, so the browser sees one origin and CORS never applies.

For a backend-only look with no Docker and no Redis, inline mode runs jobs in-process against a fake Redis:

pip install -e ".[dev]"
set FITPDF_INLINE=1
uvicorn fitpdf.web.app:create_app --factory --port 8000

To run the real queue outside Docker you need a Redis somewhere, then:

uvicorn fitpdf.web.app:create_app --factory --port 8000
python -m fitpdf.web.worker

Configuration (env vars): REDIS_URL, FITPDF_DATA_DIR (default data), FITPDF_TTL_SECONDS (default 600), FITPDF_PENDING_TTL_SECONDS (default 1800), FITPDF_INPUT_GRACE_SECONDS (default 300), FITPDF_MAX_UPLOAD (bytes, default 50 MB), FITPDF_GS_TIMEOUT (seconds per Ghostscript attempt, default 180), ALLOWED_ORIGINS (comma-separated CORS origins, only needed when the frontend is hosted separately), and the rate limits below.

Rate limits

Each visitor gets FITPDF_UPLOADS_PER_HOUR uploads (default 30) and FITPDF_RUNS_PER_HOUR floor estimates plus compressions (default 100) per hour, counted in Redis in fixed one-hour windows. 0 turns a limit off. An over-budget upload is refused with a 429 before its body is read, and every limited response carries X-RateLimit-Remaining and, when refused, Retry-After. GET /api/limits reports the caller's budget without spending any of it.

The visitor is identified by the first valid IP in FITPDF_CLIENT_IP_HEADERS (default CF-Connecting-IP,True-Client-IP,X-Forwarded-For), falling back to the socket peer; IPv6 is grouped by /64. Only list headers the proxy in front overwrites. A header it passes through untouched can be forged to get a fresh budget. The Docker Compose stack sets it to X-Real-IP, which its nginx always overwrites. Set it to an empty string when nothing sits in front.

Retention

Three clocks, because a job's risk profile changes once it finishes.

Retention is measured from completion, not upload, so a slow 40 MB scan and a fast 2 MB form get the same download window. The original upload is the sensitive half, so it goes first and is kept only long enough for the "try another size" button to re-run against it.

FITPDF_PENDING_TTL_SECONDS must stay above the queue's per-job timeout (FITPDF_GS_TIMEOUT * 8 + 120, so 26 minutes at the default). Set it lower and the sweeper will delete a job's input while it is still compressing.

The sweeper runs once a minute, so actual deletion lands within 60s of the times above.

Deploy

Backend on a VPS, frontend on Vercel.

VPS (API, two workers and Redis, in Docker Compose behind a Cloudflare Tunnel; see deploy/):

1. On a fresh Ubuntu 24.04 box, run deploy/setup.sh. It hardens SSH, sets up the firewall, swap and Docker, clones the repo to /opt/fitfilesize, and installs two timers: a watchdog that restarts a container /health reports stuck, and an autodeploy that deploys main within two minutes of a merge.
2. Put the tunnel token and ALLOWED_ORIGINS in deploy/.env (see deploy/.env.example), then run deploy/deploy.sh once.

After that, merging to main is the deploy. journalctl -t fitfilesize-autodeploy shows what went out; a commit that fails to deploy is tried once and then waits for the next merge, or for deploy.sh by hand.

Vercel (React frontend):

1. Import the repo, set the root directory to frontend. Vercel detects Vite; the build command is npm run build and the output directory is dist.
2. Add an env var VITE_API_URL with the API URL, e.g. https://api.fitfilesize.com. It is read at build time (see frontend/.env.example), so changing it needs a redeploy.

Keep FITPDF_MAX_UPLOAD well under each worker's memory cap: Ghostscript needs several times the file size while distilling.

The API serves no HTML. In production the SPA is a separate origin (Vercel), so ALLOWED_ORIGINS is required there; in Docker Compose nginx proxies /api and they share an origin, so it is not.

API

Interactive docs are served at /docs (OpenAPI at /openapi.json), and the site publishes /llms.txt, a plain-text guide for AI agents built from frontend/public/llms.txt plus the landing-page list.

All stored files are deleted on the schedule in Retention above, no exceptions.

Develop

Backend:

pytest -q          # tests skip Ghostscript-dependent cases if gs is missing
ruff check src tests

Frontend (from frontend/):

npx tsc -b         # typecheck; vite does not check types on its own
npm run lint
npm run build

CI runs both halves on every push.

Web tests run against a fake Redis with the queue in synchronous mode, so they need neither a Redis server nor a worker process.

Roadmap

• Hosting: laptop plus a tunnel, free tier only
• Form-preserving lossy path (per-image recompression via pikepdf, no re-distill)
• Sandboxed workers, rate limiting, metrics