English | 中文 · macOS · Windows (guide) · no Node.js needed · zero dependencies · MIT
dsh-baton
Hand coding tasks from Claude Code or Codex to DeepSeek Harness on your machine: the task runs live in the Harness window, the main agent is woken when it ends, and it gets back the files that changed, the project's own test results and a requirement-by-requirement checklist.
- Cheaper on big jobs: with Claude Code, the total cost, DeepSeek included, is 51–78% lower.
- Less of the 5-hour window: on a long Codex job, a ChatGPT Plus 5-hour window goes from 86.01% used to 16.01% with GPT-6 Astra, and from 13.71% to 2.67% with GPT-6.1 Sol.
- Nothing to watch or poll: the agent is woken once when the run ends, and the result already holds the changed files, the test output and the requirement checklist.
Needs DeepSeek Harness ≥ 0.2.1-rc.2 (signed in) and Claude Code or Codex; macOS / Windows, zero dependencies. Quick start →
What it is
dsh-baton is an MCP server plus a small Harness plugin. Your main agent, Claude Code or Codex, writes the task and hands it over with one tool call. The task runs in a normal Harness session that you can watch, and step into, in the Harness window while it works. When it ends, the main agent is woken once instead of polling. It gets back evidence rather than a summary: which files were created, changed or deleted, the output of your project's own tests, and a point-by-point check against the request. Unlike a plain MCP bridge to another model, the work stays visible in the Harness UI and the proof comes back with the result.
Quick start
Nothing else to install: no Node.js, no terminal. The steps are the same on macOS and Windows.
1. Add the plugin in Harness: Plugins (插件) → Add plugin (添加插件) → type dsh-baton-host → Install (安装) → Enable now (立即启用).
Switched on, the plugin registers dsh-baton for Claude Code and Codex, for every folder, and Harness says so.
2. Codex only, once: Codex Settings → Hooks → Trust dsh-baton: waiting for the Harness run.
If the hook is not in the list yet, or you want to know what trusting it changes:
The Codex hook
The hook comes with plugin 0.6.0 and later (0.6.2 and later when you have no Node.js), and shows up in that list only after you restart Harness and then Codex once, after installing or updating the plugin. Node.js is not required: without one it runs on Harness's own runtime, like the server. Codex is then woken when a run ends instead of checking every 270 s. You trust it once: updates and Harness restarts do not ask again. Skip it and Codex waits with dsh_wait instead; the first hand-over reminds you.
3. Check: in a new Claude Code or Codex conversation, ask it to call dsh_list_workspaces. It lists your Harness workspaces. Codex asks you to approve MCP tool calls: approve the dsh-baton tools (for unattended codex exec runs, add --approve-for-me).
That is all. If Harness says it could not register, run npx -y dsh-baton-mcp setup in a terminal (this needs Node.js ≥ 22.15); it does the same registration. Updating, removing and Windows details are further down.
See it run
Claude Code and Codex each hand DeepSeek Harness a task, and its subagents build this rainy-night street in 1 h 41 min. 40 s, sound on.
https://github.com/user-attachments/assets/72e2fdff-275e-48bc-8e5a-39ffb025a0a8
One Codex chat starts a task, queues a follow-up, steers the running turn, and waits for all three:
Codex and Claude take turns in the same Harness session, and every message is labelled with who sent it:
Token usage
In short: hand over the big, long jobs. With Claude Code the total cost, DeepSeek included, is 51–78% lower. With Codex on GPT-6 Astra it is 47–81% lower, and the long kanban app takes 16.01% of a ChatGPT Plus 5-hour window instead of 86.01%.
The three test tasks, asked the way a user would (the requests are in Chinese, linked as written):
- Task 1 · CLI tool: a command-line task manager in Node, no dependencies, split into modules, with tests. Request
- Task 2 · Web app: a task manager with a Node server and a page, REST API, stats, tests and a README. Request
- Task 3 · Kanban app (phased): a kanban board in plain Node and a plain front end, in three phases given one after another in the same conversation: ① the core (REST API, storage, drag and drop); ② labels, due dates, search syntax, archive, undo and redo, activity log, import and export; ③ version conflicts, WIP limits, bulk actions, live sync over SSE, stats. 55 acceptance tests written beforehand, the same for both arms. Requests: phase 1 · phase 2 · phase 3
| Task 3 | Alone | Handed over |
|---|---|---|
| Opus 5.5 high | 55/55, 39 min | 55/55, 93 min |
| GPT-6.1 Sol high | 55/55, 18 min | 55/55, 101 min |
| GPT-6 Astra high | 55/55, about 31 min | 55/55, about 87 min |
Cost per task at list price, DeepSeek V4.1 Flash 1017 at its peak price. Opus 5.5 runs in Claude Code, GPT-6.1 Sol and GPT-6 Astra in Codex, all at high effort:
| Task | Model | Alone | Handed over: main agent | Handed over: DeepSeek | Handed over: total | Total | Main agent | 5-hour window, alone → handed over |
|---|---|---|---|---|---|---|---|---|
| Task 1 · CLI tool | Opus 5.5 high | $1.07 | $0.42 | $0.10 | $0.52 | −51.2% | −60.8% | — |
| GPT-6.1 Sol high | $0.17 | $0.06 | $0.13 | $0.20 | +15.3% | −62.9% | 2.08% → 0.77% | |
| GPT-6 Astra high | $0.79 | $0.30 | $0.12 | $0.42 | −47.4% | −62.0% | 7.83% → 2.98% | |
| Task 2 · Web app | Opus 5.5 high | $2.13 | $0.47 | $0.13 | $0.60 | −71.7% | −77.7% | — |
| GPT-6.1 Sol high | $0.41 | $0.06 | $0.18 | $0.25 | −40.2% | −84.5% | 5.08% → 0.79% | |
| GPT-6 Astra high | $2.27 | $0.30 | $0.13 | $0.42 | −81.4% | −86.9% | 22.43% → 2.94% | |
| Task 3 · Kanban app (phased) | Opus 5.5 high | $14.18 | $2.32 | $0.84 | $3.16 | −77.7% | −83.6% | — |
| GPT-6.1 Sol high | $1.12 | $0.22 | $0.81 | $1.03 | −8.1% | −80.5% | 13.71% → 2.67% | |
| GPT-6 Astra high | $8.69 | $1.62 | $0.74 | $2.35 | −72.9% | −81.4% | 86.01% → 16.01% |
Hand it over: big jobs, long jobs, and whenever the 5-hour window is running low. The main agent's own spend drops 61–87% on every task and model.
Do it yourself: small tasks on Codex with GPT-6.1 Sol. Sol is cheap enough that DeepSeek's part of a hand-over, two thirds or more, outweighs what Sol saves.
What was tested, and how
- The only difference in the hand-over runs is one line added at the end of the request: 交给 DeepSeek Harness 去做。 ("Hand it to DeepSeek Harness.")
- Same model and effort in both arms, and every run judged by the same acceptance check, which the model never sees.
- Tasks 1 and 2: the mean of three runs per cell. Task 3: one run per cell. Every run passed its acceptance check, with no rework.
- Prices are list prices. DeepSeek is counted at its peak price; the real DeepSeek bill came to about 58% of that.
- The 5-hour window share is worked out from each run's cost: 12.27 points per $1 for GPT-6.1 Sol, 9.90 for GPT-6 Astra.
- From 0.6.1 Codex is woken by its Stop hook instead of polling with
dsh_wait, and 0.6.2 cuts the MCP instructions to one sentence, so Codex reads a few thousand to over ten thousand fewer new input tokens per hand-over.
How it works
Pick a model: just say which one, for example "hand it to DeepSeek, V4 Pro". dsh_send passes it as model (and reasoning_effort), matched against the models Harness lists, so a model Harness adds later works as soon as it shows up. It applies to that session only; Harness's default model stays as it was. dsh_list_models shows what is available.
Nothing to configure for waiting; if you want to know what each client does while a run is going:
How each client waits
- Claude Code waits for a run in the background (the
wait_commandthatdsh_sendreturns) and is woken once, when the run ends. - Codex with the dsh-baton Stop hook trusted (from 0.6.1): after
dsh_sendit ends its turn; the hook waits for the run outside the model and, when the run ends or asks something, continues the same conversation with the result. One model request per run instead of one every 270 s. - Codex without the hook waits inside
dsh_wait, up to 270 s per call, just under its 300 s tool timeout. An unfinished wait returns only the state, so Codex calls again without summarising. Codex gets nowait_command: its terminal cannot wake it, so it would poll.
How a hand-over is checked
You don't have to take DeepSeek's word for it. Before the run, dsh-baton notes what is in the folder. When the run ends it shows exactly which files were created, changed or deleted, and runs your project's own tests itself (npm test, or whatever the client passes as checks). A second, read-only DeepSeek agent then goes through the request point by point and ends with a table: requirement, met or not, and where (file:line). Claude or GPT reads just that, sends anything missing back in one message, and opens code only where a row says "not met". Unless cwd names another folder, the new Harness session starts in the folder you're already working in.
Tools
When you want the exact parameters and return fields of each tool:
Full tool reference
The server's MCP instructions are a single sentence (from 0.6.2); how to hand over, wait and answer is in each tool's own description. Codex repeats the instructions in front of every tool's description, so the catalogue it shows the model is now about 9.7k characters instead of 24.3k.
| Tool | What it does |
|---|---|
dsh_list_workspaces | Workspaces in the Harness sidebar |
dsh_create_workspace | Through dsh_call. Register a folder as a workspace (creates the folder if missing); returns the existing one if already registered |
dsh_list_sessions | Sessions newest first, with title, folder, running state and model (what its next request uses); filter by folder or text. Archived sessions are left out |
dsh_list_models | The models Harness can run (provider, id, name, reasoning efforts) and its default model |
dsh_read_session | Recent prompts and replies of one session (with tool names); archived: true for an archived session |
dsh_send | Send a message: session_id continues that session; otherwise a new one starts in cwd or workspace_id, or, with neither, in the folder the conversation works in (a cwd that is not a workspace yet is registered first; a cwd outside the conversation's folder is allowed and noted in folder_note). checks: test commands dsh-baton runs itself when the run ends (see How a hand-over is checked). Returns a run_id at once. In Harness the message is marked "Sent by Claude / ChatGPT from another chat". An archived session is refused: unarchive it in Harness, or start a new session. To a busy session, mode followup queues the message after the current turn and steer adds it to the running turn; left out, it does what Harness's own setting says (Settings → sending while busy: queue or steer), and followup when that cannot be read. mode_source says which applied. model only when the user names one ("DeepSeek-V4 Pro", "v4-pro"; reasoning_effort likewise): it is matched against Harness's own model list, ignoring case, spaces, hyphens and a leading DeepSeek, so a model Harness adds later (V4.1 Pro) works as soon as Harness lists it; a name that matches nothing or several fails the send, before anything is created, with the list (provider/model picks one). It is set on that session before the message goes in, and Harness's default model is put back as it was (Harness saves a session's pick as the default too). Left out, a continued session keeps its own model and a new one uses Harness's default. The reply says which in model and model_source |
dsh_status | Run progress: state, recent text and tool calls, final reply; waiting_on when the turn is over but sub-agents or jobs still run; human_interjections when someone typed in the Harness UI mid-run; state interrupted for a run cut short by a Harness restart; model the run was sent with |
dsh_wait | Codex with the Stop hook trusted does not need it. Wait for the run to end; a finished run carries evidence (files changed, check results) when the message was sent with checks (or until it stops to ask a person, see dsh_answer): up to 270 s per call for Codex, 50 s for other clients. Still going: returns timed_out with just the state; call it again. Clients that can wait in the background use dsh_send's wait_command instead. dsh_status is a one-off look, not a way to wait |
dsh_answer | Answer the questions a run stopped to ask (Harness's ask_user_question): per question, an option number or label, free text, or skip; one at a time or all at once. dsh_wait and wait_command return as soon as a run asks, with the questions (needs_input, question; the option Harness's model would pick is in harness_suggested, apart from the labels). The assistant answers by its own judgment only when you told it to decide, and then passes reason and tells you what it chose and why; otherwise it brings you the questions, starting with its own recommendation and reason. You can also answer in the Harness window: whoever answers first wins |
dsh_session_activity | Through dsh_call. What a session is doing now: running turn, sub-agents (any depth), background jobs; archived: true for an archived session |
dsh_update_queued | Through dsh_call. Change a message still waiting in the queue of a busy session, by its run_id: edit its text, remove it, or steer it into the running turn now. Once it has reached the conversation it can no longer be changed |
dsh_cancel | Stop everything a session is doing, by run_id or session_id: turn, sub-agents, jobs. Harness also drops the messages waiting in its queue; their runs end as cancelled |
dsh_rename_session | Through dsh_call. Rename a session |
dsh_rename_workspace | Through dsh_call. Rename a workspace (sidebar title only; the folder is not moved) |
dsh_list_runs | Through dsh_call. Recent runs, optionally of one session |
dsh_call | Calls any dsh_* tool by name: the less used tools (create and rename workspace, rename session, session activity, update queued, list runs) are not in the tool list from 0.6.0 on, to keep every request short, and are reached this way; also for a conversation whose tool list predates an update. An unknown name lists the tools |
Command line and configuration
When you want to drive Harness from a terminal or a script instead of a chat:
CLI commands
dsh-baton workspaces
dsh-baton new-workspace ~/code/new-app --title "New App"
dsh-baton sessions --cwd ~/code/new-app
dsh-baton send --cwd ~/code/new-app "Scaffold the project"
dsh-baton send --session session-xxxx "Next: add tests"
dsh-baton send --session session-xxxx --mode steer "Interjection: don't change the API"
dsh-baton wait hrun-xxxx # blocks, prints the final reply; exit 0 on success
dsh-baton status hrun-xxxx
dsh-baton activity session-xxxx # running turn, sub-agents, background jobs
dsh-baton cancel --session session-xxxx
dsh-baton rename session-xxxx "New title"
dsh-baton rename-workspace ~/code/new-app "New name"
(From source, use node src/cli.mjs ….)
When the defaults don't fit, for example a different socket path or forcing headless mode:
Environment variables
| Variable | Default | Meaning |
|---|---|---|
DSH_BATON_BACKEND | auto | auto, host or headless |
DSH_BATON_HOME | ~/.dsh-baton | Socket and headless run records |
DSH_BATON_SOCKET | $DSH_BATON_HOME/host.sock | Plugin socket path (must match on both sides); on Windows mapped to a per-user named pipe, see WINDOWS.md |
DSH_BATON_WAIT_S | 270 for Codex, else 50 | How long one dsh_wait call waits; set it only if you raised the client's tool timeout, and keep it below that |
DSH_BATON_CODEX_HOOK | 1 | 0 (set for Harness) stops the plugin adding the Codex Stop hook |
DSH_BIN | the dsh inside the macOS app, else PATH | Harness CLI for headless mode |
DSH_HOME | ~/.dsh | Harness data folder (headless session reads) |
DSH_BATON_ACCOUNT | 1 | 0 uses the API-key route in headless mode |
DSH_BATON_PATCHES | empty | Extra headless --patch overlays, :-separated |
When the Harness plugin is not reachable:
Headless fallback details
When the plugin is unreachable, the MCP server falls back to Harness's dsh headless command. It can only continue sessions it created itself (headless does not load agent presets such as standard), and new sessions do not appear in the desktop sidebar. By default patches/account.patch.yml reuses the desktop app's DeepSeek account sign-in, so no API key is needed.
Install details
When you update or remove the plugin, come from dsh-bridge, run from source, or the plugin could not register:
What the plugin does, updating, removing, upgrading from dsh-bridge, installing from source, Windows
What the plugin does when switched on. It copies the MCP server to ~/.dsh-baton/app, a folder that stays put, and writes the MCP entry into ~/.claude.json and ~/.codex/config.toml directly, keeping a *.bak-dsh-baton backup of each. It starts the server with your own Node.js ≥ 22.15 when it finds one on PATH; without one, with Harness's own runtime (the Harness app in Node mode, ELECTRON_RUN_AS_NODE=1), so nothing else has to be installed. Either way it works with only the desktop apps installed, when claude / codex are not on your PATH. It runs again on each Harness start: an entry that is already right, or a working one that starts another copy of dsh-baton, is left alone. In Harness, the source switches to the npm registry ("Official npm registry", 「npm 官方源」) by itself once you type the package name, and no restart is needed. To turn the registration off, set DSH_BATON_AUTO_REGISTER=0 for Harness.
The Codex Stop hook. The plugin adds one [[hooks.Stop]] block, marked # dsh-baton, to ~/.codex/config.toml; Codex shows it as dsh-baton: waiting for the Harness run and runs it only once you trust it (dsh-baton never trusts it for you). The block only names a small script, ~/.dsh-baton/bin/codex-stop-hook (codex-stop-hook.cmd on Windows), and everything that can move, Node.js and the server, lives in that script. So the block itself never changes: updates, same-version refreshes and Harness restarts leave it as it is, and your trust stays. If the block is ever rewritten, dsh-baton drops the old trust record, and Codex asks you to trust it again. Windows uses a .cmd because Codex runs hooks through PowerShell -Command, which cannot start a quoted program path. Without a Node.js of your own, the script runs Harness's own app in Node mode (ELECTRON_RUN_AS_NODE=1), as the server does; the plugin rewrites it on each start, so it follows Harness updates. Not added without Codex, with DSH_BATON_CODEX_HOOK=0, or when Codex's dsh-baton entry names no server folder (a bare npx command); the first hand-over in a Codex conversation then says why. dsh-baton setup --codex-hook adds it by hand, setup --remove takes it out, DSH_BATON_CODEX_HOOK=0 for Harness stops the plugin adding it.
Updates need no restart. When a newer version lands in ~/.dsh-baton/app (a plugin update, setup, or a copy by hand), or the same version with changed files, conversations already open in Claude Code and Codex use it from their next dsh_* call: the server checks the folder before each call, starts the new version, and says once in that call's result that it was updated. A dsh_wait that is already running finishes on the old version first. If the new version cannot start, the old one keeps working and the result says why. A tool added in the new version shows up in Claude Code at once (the server tells the client its tool list changed); Codex keeps the tool list a conversation started with, so it does not show a new tool until the next conversation; it can still use one at once through dsh_call, which the update note points to, and the tools it already has run the new code right away.
npx -y dsh-baton-mcp setup does the same registration from a terminal: for a plugin that could not register, or when you come from an MCP directory. With the plugin already registered it changes nothing, then points you to the plugin if it is missing.
Updating. Harness has an update button only for its official plugins, so: Plugins → dsh-baton-host → Uninstall, then Add plugin → dsh-baton-host. For a while after a release, Harness installs the previous version instead (pnpm's minimumReleaseAge holds back versions published very recently, and the install dialog says so); to get the new one at once, type the version: dsh-baton-host@0.6.2. A pre-release must always be added by its exact version, such as dsh-baton-host@0.6.0-next.0: Harness resolves @next to a broken placeholder. Plain dsh-baton-host gets the latest release. Switched on again, the plugin brings the MCP server to the same version; new conversations use it. If the two are ever out of step, the first tool call that notices it says so, naming the older side and the newer side's exact version to install.
Removing. Harness → Plugins → dsh-baton-host → Uninstall, then npx -y dsh-baton-mcp setup --remove. The plugin cannot tell an uninstall from Harness quitting, so it leaves the MCP entries to that command, which also deletes ~/.dsh-baton/app; run records stay in ~/.dsh-baton until you delete it.
Upgrading from dsh-bridge. In Harness, uninstall dsh-bridge-host, then add dsh-baton-host; switched on, it replaces the old dsh-bridge MCP entries. DSH_BRIDGE_* variables and an existing ~/.dsh-bridge folder keep working for now. Tools get a new prefix (mcp__dsh-baton__…), so update any permission allowlists. A plugin added before 0.4 by pasting ~/.dsh-baton/app/host still works but does not update with npm: uninstall it and add dsh-baton-host by name.
From source (to follow main or change the code): git clone https://github.com/JialaoLiu/dsh-baton.git, then in Harness add the plugin from the clone's host folder (Add plugin → paste the path). Switched on, it registers the clone itself, so changes run before they are published. Update with git pull. node dsh-baton/src/cli.mjs setup registers the clone from a terminal.
Windows. Same steps; WINDOWS.md covers what differs (a named pipe instead of a socket file) and fixes for a Plugins page that cannot install or uninstall.
When you register by hand, or want dsh-baton in the Claude desktop chat app (not Claude Code):
Manual registration and the Claude desktop app
The plugin and setup write the same entries these commands would (with the absolute path of node, since desktop apps start MCP servers without your shell's PATH):
claude mcp add dsh-baton -s user -- "$(command -v node)" "$PWD/dsh-baton/src/server.mjs"
codex mcp add dsh-baton -- "$(command -v node)" "$PWD/dsh-baton/src/server.mjs"
-s user matters: without it, Claude Code registers the server for the current project folder only.
Claude desktop app (optional): for the chat app's connectors (separate from Claude Code), add this to ~/Library/Application Support/Claude/claude_desktop_config.json and restart the app. It shows as a "Local dev" connector.
{ "mcpServers": { "dsh-baton": { "command": "/absolute/path/to/node", "args": ["/absolute/path/to/dsh-baton/src/server.mjs"] } } }
Security and limits
Any process running as your OS user can drive Harness through the socket, the same as running dsh directly. dsh-baton relies on Harness 0.2.1-series internal service APIs, so a major Harness update may need a follow-up release.
License
MIT